Back to Products

61120 Red Wing Temperate FR Coverall

  • Flame Resistant Garment
Print Print PDF
FEATURES:
  • Two chest pockets with concealed zip closure
  • Two side pockets with hidden exterior-to-interior access and press stud closure
  • Two back pockets, right side with flap
  • Tool pocket on right leg
  • Elasticized waistband
  • 2" (50mm) wide reflective FR striping around arms, legs and over the shoulders
  • Two radio loops
  • Concealed press studs on cuffs and ankle openings
  • Concealed two-way, heavy-duty brass zip with press stud closure
  • Left sleeve pocket with pen pocket divider, small flap with hook-and-loop closure
MATERIAL:
Daletec®, (Quality 10/20, 802536), FR 100% Cotton, 7.5 oz/yd²/250 g/m²
SIZES:
34: RG, ST, TL, XT 64: RG, ST, TL, XT 44: RG, ST, TL, XT 54: RG, ST, TL, XT 32: RG, ST, TL, XT 62: RG, ST, TL, XT 42: RG, ST, TL, XT 52: RG, ST, TL, XT 46: RG, ST, TL, XT 38: RG, ST, TL, XT 36: RG, ST, TL, XT 68: RG, ST, TL, XT 66: RG, ST, TL, XT 48: RG, ST, TL, XT 58: RG, ST, TL, XT 56: RG, ST, TL, XT 60: RG, ST, TL, XT 40: RG, ST, TL, XT 50: RG, ST, TL, XT 70: RG, ST, TL, XT
COMPLIANCE:
EN ISO 11612, IEC 61482-2 (Class 1), NFPA 2112 Whole Garment Certified
COLORS:
Tan, Petro Blue, Navy Blue, Royal Blue, Red, Graphite Gray, Orange
DESCRIPTION:

This coverall has a classic look and great fit. It features eight pockets and YKK® non-sparking zips throughout. 100% brass press studs are covered on the inside, so no brass comes in contact with your skin. Major seams are double- and triple-stitched and stress points are bar-tacked for strength. 2" reflective FR striping added for better visibility and safety.

Fitting Chart
About daletec®
CLOSE

DALETEC®

This flame retardant material is tested for resistance against flame flash and electrical arcs under realistic conditions. This strong yet comfortable product has the properties of cotton, including absorption and transport of moisture. Workwear made with Daletec® material can also be specified with optional antistatic properties. Daletec fabrics have been third party certified to meet the requirements of EN 531.